Tokuyama Palfique LX5 Dental Composite Syringe 3.8g | Shades A1, A2, A3, A3.5

Precision. Speed. Aesthetics.

Palfique LX5 dental composite by Tokuyama is an advanced light-cured composite resin featuring RAP Technology (Radical-Amplified Photopolymerization) for a one-third reduction in curing time versus conventional composites. Its 82% by weight silica-zirconia filler with spherical submicron particles (0.2μm mean size) delivers outstanding polishability, high gloss retention, and exceptional wear resistance — making it ideal for both anterior and posterior restorations across all carious classes.

Key Features & Benefits of Palfique LX5 dental composite

• Outstanding polishability with high gloss retention over time
• Wide shade matching range with chameleon effect
• High wear resistance with minimal wear to opposing teeth
• Low polymerization shrinkage due to 82% filler load
• Good radiopacity
• RAP Technology — curing time reduced by one-third vs conventional composites
• Extended working time: 90 sec under ambient light (10,000 lx)
• Quick cure: 10 sec with halogen light (≥400mW/cm²)

Indications

• Direct anterior and posterior restorations (all carious classes, including occlusal)
• Direct bonded composite veneers
• Diastema closure
• Repair of porcelain and composite restorations

Key Specifications

• Type: Light-cured composite resin
• Filler: 82% wt (71% vol) silica-zirconia, mean particle size 0.2μm
• Monomer: Bis-GMA + Triethylene glycol dimethacrylate
• Technology: RAP (Radical-Amplified Photopolymerization)
• Curing time: 10 sec (halogen ≥400mW/cm²)
• Working time: 90 sec (ambient light 10,000 lx)
• Wavelength: 400–500nm
• Shades: A1, A2, A3, A3.5

Directions for Use

1. Isolate — use rubber dam or suitable isolation to prevent contamination.
2. Prepare tooth — remove decay and damaged structure per standard restorative procedures.
3. Etch and bond — etch surface, rinse, and apply bonding agent per manufacturer instructions.
4. Apply Palfique LX5 — dispense from syringe onto mixing pad; place and shape with appropriate instrument.
5. Light-cure — cure with suitable light unit (400–500nm); ensure full coverage of applied material.
6. Finish and polish — use fine finishing burs and polishing discs for desired aesthetics.
7. Check occlusion — verify bite and adjust if necessary.
8. Clean instruments — wipe placement instruments with alcohol after use.
9. Patient instructions — advise avoiding hard foods immediately after procedure. Use protective eyewear during curing.

Pack Contents

1 x Palfique LX5 Syringe Refill — 3.8g