GC FujiCEM Resin Reinforced Glass Ionomer Luting Cement 13.3g

GC Fuji CEM Glass Ionomer Luting Cement 13.3g

Japan

$70.00 USD $80.50 USD

GC Fuji CEM Glass Ionomer Luting Cement 13.3g

2 reviews

$70.00 USD $80.50 USD

Taxes included. Shipping calculated at checkout.

Country of Origin: Japan

Product Details

Intended Use: Glass ionomer luting cement for permanent cementation of crowns, bridges, inlays, onlays, and orthodontic bands
Model: GC Fuji Cem Refill
Brand: GC
Expiry Date: 10/2027
Country of origin: N/A

🚚 Free International Shipping

📍 Located in India

🔄 Free Returns

Add your product usage instructions here. Explain how customers should use your product for best results.

Specifications

GC FujiCEM™ Resin Reinforced Glass Ionomer Luting Cement — 13.3g Refill Cartridge

GC FujiCEM is the world’s first glass ionomer luting cement mixed from pastes. The specially developed Paste Pak System simplifies dispensing and offers greater consistency in cementation — helping to ensure a perfect result every time. With a minimal film thickness of just 3µm, guaranteed adhesive strength, and effective fluoride release, it is the professional’s choice for reliable permanent cementation.

Key Advantages

✅ World’s First Paste-Based GIC Luting Cement — Unique Paste Pak System for consistent, reliable cementation
✅ Correct Ratios Every Time — Cartridge delivery always dispenses the correct base:catalyst ratio
✅ Minimal Cement Waste — Flexible dosing; dispense only what you need
✅ Fast Mixing — Only 10 Seconds — Single crown; 15 seconds for 2–4 crowns
✅ No Air Bubbles — Smooth, homogenous mix every time
✅ Minimal Film Thickness — Only 3µm — Ensures accurate seating of restorations
✅ Sufficient Working Time — 3 minutes from start of mixing at 23°C
✅ Setting Time — 4 minutes 30 seconds
✅ Guaranteed Adhesive Strength — Reliable bond to tooth structure
✅ Effective Fluoride Release — Ongoing caries protection at margins
✅ Refrigeration Tip — Refrigerating cartridges extends working time by 30 seconds

Clinical Indications

• Cementing all types of metal, porcelain fused to metal (PFM), and resin crowns
• Inlays, onlays, and bridges
• Cementing porcelain inlays
• Base or liner under restorations

Composition

Paste A: Aluminosilicate glass (60–70%), 2-Hydroxyethyl methacrylate (10–20%), Urethane dimethacrylate (10–12%), Silica powder (6%), Camphorquinone (<1%)
Paste B: Distilled water (30–40%), Polyacrylic acid (30–40%), Benzenosulfonic acid sodium salt (2–3%), Silica powder (2%)

Technical Specifications

Mixing Time: 10 seconds (single crown) / 15 seconds (2–4 crowns)
Working Time: 3 minutes from start of mixing at 23°C
Setting Time: 4 minutes 30 seconds
Film Thickness: 3µm
Storage: 4–25°C; refrigerate for extended shelf life
Shelf Life: 2 years from date of manufacture
Brand: GC Corporation, Japan

Directions for Use

1. Load Cartridge — Retract piston fully. Align cartridge mark with dispenser mark and turn right to lock. Slide release lever forward.
2. Dispense — Remove cartridge cover. Depress lever to dispense required amount onto mixing pad. Bleed a small amount to waste from new cartridges to prevent air bubbles.
3. Mix — Spread material in a thin layer on mixing pad using a plastic spatula. Mix with lapping strokes for 10 seconds (single crown) or 15 seconds (2–4 crowns). Do not incorporate air bubbles. Do not mix with other materials.
4. Apply & Seat — Apply cement to restoration and seat immediately within working time.
5. Remove Excess — Remove excess cement after initial set.